January 28th, 2020
Hi! My name’s Jess - I’m the office manager here at Strobel Dentistry and the main contributor to this blog (we usually don’t do first person here so an introduction felt in order ;) ). I very recently started Sure Smile clear aligner therapy at our office, and aside from mild and irrational fears that I’ll revert to my grade school lisp, I’m pretty excited!
But it got me thinking; since my teeth aren’t in need of extreme movement, I wasn’t even sure I needed orthodontic treatment at all. As it turns out, there are ways your teeth should come together that might just never occur to you if you don’t know what you’re looking for. So how, optimally, should our teeth align?
- FROM THE FRONT: your upper front teeth should fall in front of your lower teeth (toward your lip), and should overlap them by about 2 mm. Upper and lower front teeth should hit lightly.
- FROM THE TOP (OR BOTTOM): The back teeth should be upright, NOT tipped toward the cheek or tongue. The tips of the cusps should fit into the grooves of the opposite teeth.
- FROM THE SIDE: The upper back teeth should sit on the outside of the lower teeth. When the teeth go side-side, the ONLY teeth that hit should be the canine teeth.
Why Should I Care About My Bite?
Good question! An optimal bite not only allows for clear speech and efficient eating, it:
- prevents muscle/jaw strain that can cause headaches
- Makes teeth easier to clean, preventing decay
- Allows teeth to wear evenly
- Prevents undue stress on teeth that could lead to breaking or cracking
If my adventures in alignment have you curious how your bite measures up, ask us for an assessment at your next visit!
December 30th, 2019
It’s time for our yearly reflection, and here at Strobel Dentistry our hearts could not be more full with all we’ve experienced this year and everything we have to look forward to in the decade to come! A few highlights:
Dr. Isabella got engaged! We could not be more thrilled for her and her fiance Tony to take this next step (and keep needling her for invites to the stunning wedding she’s planning in Colombia ;)).
Bridget, our newest hygienist, tied the knot in October in a beautiful ceremony that they followed up with a 2 week European honeymoon.
Our hygienist Aer is expecting her second baby in May! The team is really going to miss her when she’s on leave May through August, but we expect to make up for it with adorable baby snuggles.
New tech! Could we let a year go by without celebrating this?? Of course not! :) Our latest addition - the 3D printer - is fitting in nicely, and our rockstar assistant Mika is working hard to integrate it seamlessly into our daily services.
2019 also saw the expansion of our in-house services: on-site night guards, complex extractions courtesy of the itinerant specialist Dr. Sam, and expanded hours for our periodontist, to name a few. 2020 promises more enhancements and improvements to keep our patients’ experience with us phenomenal!
Thank you to all our patients, friends, family, colleagues - everyone who has touched our lives and allowed us to help improve the oral health of our community members. We wish everyone a happy, healthy new year and great things in this new decade!
December 16th, 2019
It’s here! It’s finally here! We’ve been eyeing a 3D printer for months now, waiting for the right time to introduce one to our practice, and now the time has come. Here’s a quick FAQ on our latest technological advance!
What is 3D printing?
Very simply, a printer puts out layer after layer of thin material to build up a three dimensional object. This is often called additive manufacturing, in contrast to the “subtractive” manufacturing or milling done for our same day crowns. Instead of removing material to create an object (i.e. crown or onlay), the appropriate type of liquid resin is applied in thin layers and then cured to create the appliance or restoration needed.
3D printing has been around since the 80s and 90s, but the term and its use has recently seen a big upswing. The machines themselves are quite simple, and wouldn’t be much without the sophisticated design software that allows our dentists to design restorations, appliances and guides from start to finish in a virtual environment. At Strobel, we use Itero, Dentsply Sirona, and SureSmile software, among others!
How is 3D printing used in Dentistry?
As the technology continues to develop, the possibilities are pretty much endless! Right now, considering what will maximize resources, time, and benefit to the patient, we will be printing:
Why is 3D printing any better than traditional methods?
When evaluating any product, the most common considerations are quality, time, and cost. Bringing the manufacturing of these appliances gives us heightened control over the output, allowing us to better meet individual needs. Longer term, as we continue to integrate the technology into our practice, it will result in a considerable time and cost savings that we can pass on to our patients.
January 30th, 2018
Yes please!! In our never ending quest to seek out and utilize the latest technology, we are THRILLED to announce our latest advance: pain free laser dentistry. 2018 has brought the Solea laser to Strobel, and we can’t wait to see how this changes our patients’ experience for the better!
What is the Solea laser?
Solea is the first CO2 dental laser system cleared by the FDA for hard, soft and osseous tissue procedures. It allows the vast majority of procedures to be done in less time without pain (and thus without needles and anesthesia!).
How does Solea work?
This is the really cool part. The specialized wavelength of light energy supplied by the CO2 Solea Laser vaporizes four different “photoreceptors:” hydroxyapatite, water, collagen, and plastic. It basically makes the tissue disappear! Meanwhile it overwhelms our nerves’ ability to sense pain, allowing decay and unwanted tissue to be removed quickly and without anesthesia. This energy is “pulsed” and expertly controlled by our dentists via foot pedal, guaranteeing precision and predictable results.
Are there any side effects with Solea?
You’ll feel none of the lingering numbness that you would after a traditional procedure, but just like a normal dental restoration there may be some residual soreness. During treatment you should feel no pain; our patients have reported cold sensitivity and mild pressure during use, but an overwhelming majority felt nothing else!
For what procedures can the Solea laser be used?
There are many procedures that can benefit from the use of this laser, from dental fillings to oral surgery. Some examples:
- Direct Fillings
- Apthous Ulcer Treatments
- Fibroma Removal
- Crown Lengthening / Bone Removal
- Implant Uncovering
Solea is not currently indicated for use in endodontic procedures and amalgam removals. The procedures we’ll use the laser for in our office will vary from case to case, but we expect to use it more and more as the technology continues to grow.
There are only 600 of these in the world as of January 2018, and only 2 in Chicago!! We’re so stoked to be in on the ground floor of this exciting advance in dentistry. Call us today to see if this treatment is right for you!